Welcome to Hip Sing Packaging Products (Shenzhen) Co. Ltd!

PET plastic box

Shenzhen Special Line:0755-8467 8133

Hong Kong Line:00852-2793 4028

Website:en.hipsing.cn

PET plastic box
your current location : Home >> News >> Synergy News

ContactContact Us

Hip Sing Packaging Products (Shenzhen) Co. Ltd

Hong Kong Email: sales@hipsing.com.hk

Shenzhen Email: hipsing@21cn.com
Hong Kong Website: www.hipsing.com.hk
Shenzhen Website: www.hipsing.cn

Shenzhen Website: en.hipsing.cn

What should I pay attention to when folding the blister box?

2019-12-09
Times

Folding blister packaging box is usually folded to the back, usually about 15MM-7MM. Too long or too short hemming position will not only affect the normal production, but also the effect is not perfect.

The hem length of 7MM-15MM has been subjected to numerous practical applications. This is not a concept value, and it has been tested after a long period of actual use. In some small-sized blister packaging boxes, the distance between the hem position and the product distance is restricted. Under normal circumstances, the edge of the blister box folded to the back must not exceed the place where the goods are placed. There are two considerations: First, this will block the place where the blister packaging box is raised to place the product, and it will increase man-hours in the packaging process. The second factor is also not conducive to the packaging process of blister packaging box manufacturers. The blister is usually stacked in a carton and then sealed. If the folded edge covers the concave and convex area, the two pieces of blister packaging box cannot be overlapped. In this case, the space for blister packaging box will be greatly increased, which directly increases the production cost of the blister packaging box .

What should I pay attention to when folding the blister box?

In addition to the two points mentioned above, the size of the folded edge of the blister packaging box is also reflected in the quality. The size range of 7 to 15MM is relatively easy to produce a fitted hemming position. Outside this range, the effect of the fit of the hemming will be worse. The effect beyond this size range is less ideal. There is no good way to solve this problem on the artificial hemming equipment. In many blister packaging box manufacturers, there may be some own tips to improve, but these are not consciously promoted because of the secrets of production; therefore, the fundamental solution is to start from the equipment. It has been more than ten years since the current folding machine has been in circulation. In the past ten years or more, new discoveries or developments have been made every year in the technology industry; however, since the introduction of the blister packaging box folding machine, until now, the overall structure and the principle of folding have basically remained unchanged. With the development of the blister packaging box industry, looking back, although the manual folding machine has already met most of the production needs, the entire plastic packaging box industry in Shenzhen plastic box factory has a variety of needs to solve and meet The needs of this part are the issues that the blister packaging box equipment enterprises need to seriously consider.


About
Company Profile
structure
equipment
Product
Folding box
Soft plastic box
pp packing box
Cylinder
Blister packaging
Soft glue
Hot stamping
Contact

Shenzhen Factory: China. Guangdong. Building 36, Fumin Industrial Zone,

Pinghu Community, Pinghu Street, Longgang District, Shenzhen
Tel: 0755-8467 9866 (8 lines) Fax: 0755-8467 9899
Hong Kong Company: Room 7, 6 / F, Hewlett Centre, 52-54 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong
Telephone: (852) 2793 4028 Fax: (852) 2637 7166

001.jpg

Copyright © Hip Sing Packaging Products (Shenzhen) Co. LtdAll rights reserved record number: 粤ICP备13018692号 Specializing in PET plastic box,Shenzhen plastic box factory,transparent packaging box ,Welcome to inquire! service support:China Enterprise Network
祥云平台 提供技术支持